Friday, December 27, 2013
Browse »
home»
12v
»
5v
»
a
»
ac
»
and
»
build
»
circuit
»
diagram
»
powered
»
supply
»
switching
»
Build a 5v And 12V Ac Powered Switching Supply Circuit Diagram
Build a 5v And 12V Ac Powered Switching Supply Circuit Diagram
How to Build a 5v And 12V Ac Powered Switching Supply Circuit Diagram? This supply uses an SGS-Thomson UC3842 IC in an off-line flyback regulator, providing + 5 V at 4 A and ± 12 V at 300 mA. This enables a small high-frequency (50 kHz) transformer, to handle large amounts of power that are normally handled by a 60-Hz transformer.
Q1 is a 5-A 500-V MOSFET, and the diodes are fast-recovery types. T1 has a 45-turn primary winding of #26 wire. The 12-V windings are each 9 turns of #30 wire, bifilar wound. The 5-V winding is 4 turns of four bifilar #26 wires. The control (feedback) winding is two bifilar, parallel 10-turn, #30 windings. The core is Ferroxcube EC35-3C8 with a 3/s` center leg.
5v And 12V Ac Powered Switching Supply Circuit Diagram